Rich's latest activity

Help Support Muzzle Loading Forum:

  • R
    Rich replied to the thread Midway.
    Never seen any difference in the powder. From smooth bore at 25 yards to Gibbs rifle at 500.
  • R
    Rich replied to the thread Casting round balls.
    The weights are fine, you would not notice the difference in any of them. The holes, fix that, but the weights are fine.
  • R
    Rich replied to the thread Midway.
    First I check Graf, then others, Midway, a nice company and good folks, is the last place I would go for powder.
  • R
    Rich replied to the thread Smoothbore shooting.
    .600 or .610 ball with an .015 to .018 patch should do the trick. Just make sure your mounting the gun and have the exact same sight...
  • R
    Rich replied to the thread Swabbing between shots.
    spit in the woods, light spray of windex at the range. Don't do any stabbing. The doctors wont let me have sharp pointy objects.
  • R
    Rich replied to the thread How far would YOU shoot?.
    between 50 and 60
  • R
    That is great, even if lucky, shooting. And you put a smile on the face of every geezer reading this. (Boy, do I qualify!) I wouldn't...
  • R
    Rich replied to the thread Using Rem Power pistons.
    Going to look in to that.
  • R
    You might want to look for a big BORE. A big bore will kill a big boar easily. How big a bore do you want? Was looking at a 4 bore...
  • R
    Went to visit my son in OKC to visit his range and do a little shooting. He shoots unmentionables and is very good out to 700 yards...
  • R
    Rich posted the thread Rifle shoppe in General Muzzleloading.
    Paid a visit to the Rifle Shoppe yesterday. What wonderful people. I think I would pay them to let me work there. No doubt about it!
  • R
    Rich replied to the thread Golden Age of Piracy.
    Remember the QAR was scuttled. Most of the arms would have been taken off by the crew.
  • R
    Rich replied to the thread Snapped at the wrist!.
    Gorilla glue and screws up thru the trigger guard is what I would look at. Did one about a year ago and still running good.
  • R
    Rich posted the thread Using Rem Power pistons in Smoothbore.
    Should I cut the bottom cushion off the piston and use a 1/2 inch cusion lubed or just use the power piston as is with a hard card, 1/8...
  • R
    Rich replied to the thread Weight of powder.
    Dont see where this matters all that much. Just figure the charge your particular gun likes and use it. Dont care if doesn't jive with...
Top