• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Recent content by n.h.schmidt

muzzle loading side side shotguns
the hawken shop
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. N

    .32 CVA Squirrel rifle hooked breach plug

    I have made such a animal for my CVA mountain rifle. I had a as new Lyman GPR barrel and I made a CVA type breach plug and fitted a drum to it. Worked out fine and still use it today. Maybe a custom made one would work for you. Is the barrel still good?
  2. N

    1/4-28 Powder drum

    A place called The Gun Works has what you want . 7/16 dia undrilled for nipple 1/4 x 28 thread drum . Sku D-19 $ 3.75. I have used them before and no problem at all.
  3. N

    CVA Plainsman

    Guys The breach he is showing us is a different barrel. Notice no rust and it's in the white. Someone must have tried to unscrew the breach plug and it broke off.
  4. N

    Making percussion caps

    The role caps don't work so good anyway. Just too much paper is trying to blow through that tiny vent hole. You can do away with the paper if you harvest the dots off the role. I used to do that and used 12 dots in the cups.As many as 15 sometimes. It all worked ok but the prime-all and the...
  5. N

    2024 cap update, bad and the bad

    To answer a question about the brass I use. I ordered .005 36 gauge soft brass . A 10"x30" sheet and it could make about 1200 cups. Works perfectly on my revolvers .No fragment and no cap jams after 100 shots. Nothing done to the revolvers. They just puff out a little and stay on the nipples...
  6. N

    2024 cap update, bad and the bad

    Beardedgunsmit is reminding us that there is a way forward by making your own. His way with the printer cups are working . For myself I use a die made by 22 reloader. I use either double wall pop cans or brass sheet for the cups. There are real primer mixes that work. I have made my own caps...
  7. N

    How i make my caps

    Looks like you are on to something. For myself I could not work that fast to do that many before it all dried out. Alcohol dries fast and so will the duco cement.. What's the cost of the resin to make the cups?
  8. N

    How i make my caps

    When you mix up a batch as described,how many caps can you load with it? Have you fired any with a loaded gun?
  9. N

    Tap- o- cap style musket cap tool question

    Ok It happens Are you sure you want a formula that uses glass? It gave it a try once and never again. You can feel that glass grit and it's on everything. The glass does nothing for you. The FA-42 will do all you can want.
  10. N

    Tap- o- cap style musket cap tool question

    Ok I'll bite. What is the H11 priming?Most of us use the FA-42 ,some the H-48. The FA-42 is simple and powerful . It is corrosive though.
  11. N

    Tap- o- cap style musket cap tool question

    If you have the needed skills ,there are plans available to make your own. I don't know of anybody making and selling the Musket size die. It would be nice though.
  12. N

    DIY Caps Question

    For those who don't have the primer trays,the plastic 22rf racks that hold 50 or 100 rounds will serve . Glued or taped to a hunk of wood or cardboard they are handy. Just the thing to hold the cups if you spray. I do use the brass but only for the revolvers. The double wall pop cans work well...
  13. N

    DIY Caps Question

    Nobade Did you make your own musket cap die? I have started making one but I'm half way done and there it sits. No drive to finish it. Fireworks supply houses are a good way to get the supplies.If you don't already have a die to make percussion caps ,get the 22 reloader die set. It's not...
  14. N

    Cap Priming Compound

    Nobade and anyone that is interested. I used K&S Soft Brass Stock No 6010 36 gauge 12" X 30". That's 360 square inches and could make as many as 1440 cups. I had to use a little paste wax on the side that becomes the inside of the cup.The formed cups didn't want to come off of the post in the...
  15. N

    Cap Priming Compound

    I use a cut in half red plastic toy cap gun cap Usually found in ring s for toy revolvers. Glued to a matchstick. Half size for sidelock rifles and 1/3 size for the revolvers. I have found that too much power in the revolvers fragment the cup leading to a lot of problems. .005 36ga brass is...
See more
Back
Top