• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Recent content by Joel/Calgary

the hawken shop
L & R
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. J

    Pilgrim guns

    When I have read the term used with sufficient information to identify the difference, it has consistently been, as has been mentioned already, a firearm more like a musket than an arquebus or a caliver but of a somewhat smaller (but implicitly or explicitly standardized) bore, possibly somewhat...
  2. J

    Help, brain fade

    Possibly "drag boat" similarly to sledges such as the "stone boat"? Regards, Joel
  3. J

    Barrel length and powder chamber dimensions?

    CClyde was responding to CalGunner's use of "g" as the abbreviation for his powder charge units. "G" is properly the unit designation for grams, while "gr." (preferably with the period, as an abbreviation) is the proper unit designation for grains. A lot of us live with both units and the...
  4. J

    Homemade shot

    Calling the home-made stuff with tails "swan shot" is a modernism. It would have been called something like "drip shot" back then, and was purely a hard-times, do-it-yourself product. None of the types of commercial shot looked that bad. Traditionally, "swan shot" referred to a size of cast shot...
  5. J

    shot cards?

    Sorry I'm coming a bit late to the party, but I haven't been to the Forum in a while. A term I've seen used for thickness of in the industry is the "point", which is a 1/1000th of an inch thickness. The best material I've found to make cards out of is often used in very stiff dividers and file...
  6. J

    Thoughts on my load

    You didn't note whether you have tried thicker wad columns, but I have read reports by shooters of both muzzle- and breech-loaders with jug chokes who found their best performance with thicker wad columns, sometimes surprisingly thick. The theory was that this kept the powder gasses sealed...
  7. J

    steel shot for legal wildfowl hunting

    OK, while I'm thinking about it, I'll repost some things concerning our potential use of steel shot and of the shot protectors potentially used therewith. Some shooters have reported success with steel shot within limitations they consider acceptable. Most hunters that report consistent success...
  8. J

    steel shot for legal wildfowl hunting

    For completeness, I'll mention the other (expensive but) shoots-like-lead shot that does not need bore protection - EcoTungsten a.k.a. Nice Shot. Regards, Joel
  9. J

    28 gauge double shot load

    This sounds like what is usually termed an "English" measure - a tube with three slots and a spring-loaded rocking lever moving two gates. You can reduce the capacity to this more suitable by inserting something in the tube to take up some of the volume. For my 16ga, I decided to reduce one of...
  10. J

    clueless about shot size

    If nothing else, you should be able to mail-order it. One source would be Wil Bilozir, the Ballistic Products rep for Canada, at http://bilozir.net/reloading.htm. Dunno about ordering from Wholesale Sports or BassPro. You might try to find some other shotgunners and and throw in together to...
  11. J

    My brand new wheellock pistol

    The wheel is harder than pyrite but softer than flint, so with pyrite, the wheel scrapes sparks off the rock, while with flint, the rock scrapes sparks off the wheel, wearing it down MUCH faster. Regards, Joel
  12. J

    Use of sharpening "steels" on knives

    One thing that hasn't come up in this discussion is that for the past decade or two, "steels", both smooth and ribbed, may also be diamond impregnated. I have a variety of "steels" including ceramic, and the most aggressive one is a fairly long ribbed one of reasonably recent manufacture (last...
  13. J

    Fusil pronunciation?

    As has been said, both today and back in the day, some folks used the French few-ZEE or some approximation thereof and some (many?) Anglicized it in various ways. For reference the term in French originally referred to a fire-steel (and later the fire-making kit as well, according to one source...
  14. J

    new shotgun

    Wes, Ballistic Products still lists #1 & #3 in somewhat pricy nickel-plated, albeit they are actually nearest-size metric 4.1mm and 3.5mm. The twice-barrel likes BP's magnum or copper-plated #5s for most game. Anything bigger is usually for waterfowl and it's bismuth (2s and 4s weigh in about...
  15. J

    Really big bore; 6 gauge

    Probably too late now, but you could likely have done it by accumulating pewter tankards, candlesticks and such from thrift stores and garage sales, and casting ~3oz pewter balls instead of 4oz lead ones. Tin shot is a legal, but uncommon nowadays, non-toxic alternative in some jurisdictions...
See more
Back
Top