• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Recent content by Eddie2002

Shop deals on ebay
the hawken shop
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. E

    .54 Pedersoli "Kitucky" Pistol

    Not bad at all, looking good. I did a little carving on a CVA mountain rifle which needed a refinish and went through a lot of my wife's cheap nail files for sanding around detail work. Just a tip for your next one because there is always another one in your future.
  2. E

    SOLD Navy Arms Buffalo Hunter **SPF**

    I have a Buffalo Hunter with the original ram rod. It's barely 5/16 in diameter and the tip looks like a round mushroom with a dimple in the end. I don't use it just because it looks a little flimsy and is original instead I use a heavier wood range rod. Sometime in the rifle's life a peep site...
  3. E

    Traditions Hawken Rusted Clean Out Screw

    I used a Harbor Freight hammer impact screw drive on a couple of frozen clean out screws with no problem. Heat with propane and then cool with oil, do that three or four times then hit with the impact screw driver. It's nice to be able to get them out if you dry ball. Anti seize grease or...
  4. E

    Watching Jeremiah Johnson

    I remember watch "Little Big Man" years ago and still remember it as a good flick. Think I'll try to track down a copy of it to watch on a quiet evening.
  5. E

    Stuck ball in a charged rifle

    After my first dry ball I made a range rod out of 3/16 inch steel and welded a loop in it's end. Haven't needed to use it yet but plan to tie the loop off on a tree or whatever is handy with a little slack and just give it a goodly yank after setting the ball puller in properly. I have had to...
  6. E

    CVA Mountain Rifle Pic Thread

    OK, here's mine. Some of the pictures have been posted before. The pictures are of the rifle as I got it off a rendezvous blanket last year with no butt plate and how it ended up after I reworked some of the wood and refinished it. I decorated the wedge plates with a nail punch and a center...
  7. E

    Black powder?

    I'm not a heavy shooter and the pandemic has kept me off the local county range for about six months but I'm pretty well stockpiled for BP, Pyrodex and caps. During the down time I've learned how to safely mix common household ingredients in the proper proportions to supplement my BP supply...
  8. E

    Cva mountain prices?

    I picked up a four screwed patch box .50 caliber CVA Mountain rifle about a year ago for $100.00 at a rendezvous. It was missing the butt plate, the strange greenish finish on it was beat up and had a load stuck in the breach. Found a NOS butt plate on flea bay for $20.00, got the old charge...
  9. E

    Homemade Plaster or Paris Lead Mould?

    I used to use plaster of Paris to mold little lead solders when I was a kid with no problems and never had one blow up on me. If you are going to give it a try dry the mold out in an oven at a low heat for about 3-4 hours which is what I did. The biggest problem with plaster is that it's soft...
  10. E

    My NIB CVA Mountain Rifle

    Deermanct said "Congrats on a good deal. I was looking at that same rifle. How much does that rifle weigh? Just curious" I had my CVA Mountain rifle out yesterday and tossed it on the scale. It weighs in at 8lbs 4oz which is interesting because my CVA Hawken with a 28 inch barrel weighed more...
  11. E

    My NIB CVA Mountain Rifle

    Deermanct said "Congrats on a good deal. I was looking at that same rifle. How much does that rifle weigh? Just curious" I had my CVA Mountain rifle out yesterday and tossed it on the scale. It weighs in at 8lbs 4oz which is interesting because my CVA Hawken with a 28 inch barrel weighed more...
  12. E

    CVA Mountain Rifle... salvageable?

    "There was a huge amount of gunk in the bottom of the barrel" That sounds familiar. Had the same problem with the basket case I bought last year. Ended up using some carb cleaner and a patch jag to break loose part of a round ball, a piece of a patch and some real funky black powder residue...
  13. E

    FOR SALE CVA Bobcat 50.

    I was lucky enough to pick up a CVA Frontier in .50 caliber which is pretty much the same as a Bobcat but with a wood stock. It's a great little rifle which I use for wood walks instead of a full sized Hawken or Mountain rifle. It filled out my set of three rifles all with browned barrels, The...
  14. E

    Does anyone recognize this lock?

    Sounds like you have a good plan to correct the misalignment, little changes at the right spots is the way to go. Someone earlier mentioned that the nipple is mushroomed which will cause misfires so while you are letting the stain dry clean it up with a file. I've had a lot of misfires from...
  15. E

    Anyone alter their shooting because of shortages?

    Not shooting right now because of Covid and the restrictions the local county range has in place. I have plenty of caps and during all the down time have learned to make my own black powder.
See more
Back
Top