• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Recent content by Darkgael

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    Removing rust in the barrel

    Bored out to .54 would give you a nice 28 gauge smoothbore. Maybe cut the barrel back a bit to save some weight. A GPR is a tad heavy for an upland gun
  2. D

    Trying to decide

    I was in a similar position a few years ago. I went with a 20 gauge fowler made by Matt Avance at TVM. After a season or two in the PA uplands, I wanted something lighter and so I turned to Mike Brooks who made for me a very faithful copy of the New England #9 in Switlick’s book. It is a 16...
  3. D

    Hudson's Bay Camp Knives

    Condor knives HB……the large and small of it.
  4. D

    Best powder charge for Traditions Kentucky .50 cal percussion pistol?

    I have a couple of .50 caliber underhammers. I have settled on 25 grains of FFFg as my go to load.
  5. D

    Wads For a Smoothbore Pistol

    Experiment. You may not need much. You will need a nitro card over your powder charge. Thick or thin? You may want to patch the round ball. The resulting fit should be tight…..you may have to tap it in with a hammer until it is past the muzzle. Using patch material like pillow ticking, your ball...
  6. D

    What do you carry in your hunting pouch for your shotgun?

    V.M. Starr. Premeasured powder charges in capped vials. pre-measured shot charges in capped vials. A handful of stiff OP wads for over the powder and over the shot. Extra flints. Pick. small brush. Priming powder flask (small). If I go with the Skychief, a tin with soaked wads.
  7. D

    Wad carrying?

    I use a snuff tin or an empty tin from air rifle pellets
  8. D

    Lyman Great Plains rifle

    The Gpr was my intro to flint guns. Mine was third hand when I got it. I have it still for many years. Shoots great. I did buy a second barrel for it. Dont remember why. It sits in the closet.
  9. D

    Please help with exploring a smooth bore option!

    Some years ago I was asking the same advice here when toying with the smoothbore idea. The advice was helpful. I was not interested in making one. I ended up asking Mike Brooks to put one together for me.(Guns For Sale - Mike Brooks Flintlocks). I wanted a light, fast handling gun for upland...
  10. D

    Frizzen hardening question

    I use Kasenit. I use two old plumber’s torches placed at 90 degs from each other. I hold the object in the flames (in the garage). I process the piece through the flame twice. Quench in quench oil. The pieces emerge hard.
  11. D

    A bespoke Pennsylvania long rifle

    Very nice to follow the work in progress.
  12. D

    My New Mortar

    Beautiful job. It doesn’t look at all crude to me. Note: wadding does increase distance. It also increases pressure. Search for Max Load to find a thread started by Grottorian in 2007. Good info. Look at the Safe loads and construction thread in the stickies section.
  13. D

    My New Mortar

    I have a few gb mortars. One I made on a little lathe from a design by Douglas Dickens.
  14. D

    Application of Barrel Brown & Degreaser

    I have used the Laurel Mt. browning on an old Parker SXS. It came out of that glowing.
Back
Top