bldtrailer's latest activity

Muzzleloading Forum

Help Support Muzzleloading Forum:

  • bldtrailer
    bldtrailer replied to the thread Wire inlay hunter's star?.
    I cut the Wire from the brass I used for inlets .cut into strips and hammered into the groves I cut with very narrow chisals some made...
    • DSC03291 (2).JPG
    • tys flinter9.JPG
    • tys gift flinter4.JPG
    • DSC03288 (2).JPG
  • bldtrailer
    bldtrailer replied to the thread Ticking.
    and that's why I buy the a yard to try, then go back & buy the rest of the same bolt if it works
  • bldtrailer
    bldtrailer replied to the thread Ticking.
    if you have old jeans handy 100% cotton lower leg of mens is(knee/seat area gets warn thinner) 10oz denium the ladys and kids are 8oz...
  • bldtrailer
    bldtrailer replied to the thread Ticking.
    Joeann fabricks you can by the yrd or less just make sure 100% cotton I like denium 10oz and drill cloth 40 they also have pillow...
  • bldtrailer
    bldtrailer replied to the thread Sharpening flints?.
    After working the 911 WTC recovery for 7 months , I gained a new respect for how "DUST" can kill more of our members have died after...
    • 3b60d2c5-ab00-48d2-a64e-22c36ae8953b_zps627b84b7.jpg
  • bldtrailer
    here's how I dressed up a tradations Kentucky I added a side plate and inlet some wire and hand cut brass, my first attempt at building...
    • DSC03291.JPG
    • DSC03288.JPG
  • bldtrailer
    Ok here's your plan go to the Gun Makers fair before or after Dixon's Muzzleloader shop (they will not be at the fair, but will be open...
  • bldtrailer
    bldtrailer replied to the thread Chert.
    Posted before chert forms in limestone, flint in chalk . same chem comp. flint is alittle glasser to test 1can it scratch a glass...
    • DSC03538.JPG
    • DSC03227.JPG
    • DSC03535.JPG
    • DSC03232.JPG
    • DSC03222.JPG
  • bldtrailer
    bldtrailer replied to the thread Sharpening flints?.
    you can file the edge of a screw driver into a small notch
    • DSC03238 (2).JPG
    • DSC03238.JPG
  • bldtrailer
    bldtrailer replied to the thread Sharpening flints?.
    Please remember IF you grind flint/chert use a good mask that dust is very nasty for your lungs (wet is safer till the dust dries) In...
    • DSC03220.JPG
    • DSC03195.JPG
    • DSC03227.JPG
    • face mask.jpg
Top