• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
the hawken shop
shop deals on amazon
muzzle loading side side shotguns
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Audie1966

Audie1966

32 Cal
Joined
Last seen
Messages
38
Reaction score
16

Latest activity Postings About

    • Audie1966
      Audie1966 replied to the thread W.Richards 12GA.
      I got 6mm x 1 from TOTW and a rod blank. I am going to make another rod from a dowel blank. Where or what material is best. The TOTW is...
    • Audie1966
      Audie1966 replied to the thread W.Richards 12GA.
      These are not original. The Lyman nipples are 6mm and fit after cleaning the jacked up threads in the barrel. Working on getting longer...
    • Audie1966
      Audie1966 replied to the thread W.Richards 12GA.
      Mine measure as 6mm. Trying to determine pitch.
    • Audie1966
      Audie1966 reacted to TransYank's post in the thread W.Richards 12GA with Like Like.
      Yes 1/4 x 28.
    • Audie1966
      Audie1966 replied to the thread W.Richards 12GA.
      I just tried my thread gauge on them. M6 metric but I am leaning towards 1/4 by 28. Sound right?
    • Audie1966
      Audie1966 replied to the thread W.Richards 12GA.
      Agreed. working on the nipple setup. Not sure of the threads on this one.
    • Audie1966
      Audie1966 reacted to TransYank's post in the thread W.Richards 12GA with Like Like.
      Gun should have a half cock compare left lock to right side. And file a notch in the tumbler of it. If it doesn't already have one.
    • Audie1966
      Audie1966 reacted to Flint62Smoothie's post in the thread Westley Richards double barrel with Like Like.
      Here’s a picture showing the ‘island’ lock and the lockplate relief to the wrist.
    • Audie1966
      Audie1966 reacted to dracer's post in the thread W.Richards 12GA with Like Like.
      looks like a nice project , you will have a nice shotgun when done
    • Audie1966
      Audie1966 replied to the thread W.Richards 12GA.
      I believe this is a William Richards design. I have all of the tools and have done quite a bit of work. The research and knowledge is...
    • Audie1966
      Audie1966 reacted to andy52's post in the thread W.Richards 12GA with Like Like.
      As stated those aren't the original hammers W Richards was an early clone /knockoff of the famous Westley Richards gun company. I had...
    • Audie1966
      Audie1966 replied to the thread W.Richards 12GA.
      I have been looking at both TOW and Dixie. I am going to measure the threads as these are not the original nipples. The hammers are...
    • Audie1966
      Audie1966 reacted to TransYank's post in the thread W.Richards 12GA with Like Like.
      Track of the wolf should have screws and nibbles. I'd bend hammers but they sell them also.
    • Audie1966
      Audie1966 replied to the thread W.Richards 12GA.
      So on to the refurbishment...Suggestions for screws and the nipples...
    • Audie1966
      Audie1966 reacted to TransYank's post in the thread W.Richards 12GA with Like Like.
      I agree with Feltwad. I have put together several of these English double barrels just to shot and hunt with they fit me better and...
    Show older items
  • Loading…
  • Loading…
Back
Top