• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Best Choice For A .45 Target Rifle

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
My idea on a target rifle (700 yds worth) A pretty Renegade stock with a 1-17 twist Rice barrel/Lee Shaver Long range venier shooting 80 gr 1 1/2 F OE pushing a 530 gr Elliptical paper patched rocket , and the almost 12LBs is mandatory to staying at the bench you sat on /Ed
My .45 heavy is a peep sighted left hand TC New Englander refit with a .458 bore diameter (.470 groove) to use various 45-70 molds.
 
Last edited:
Yo Frankie.
Yeah, thought about getting a Gibbs once upon a time but back then decided on a New Englander reworked to .458 bore (.470 groove) instead.
For this project what I'm aiming for is a fairly light weight handy handling rifle, something that handles about like the example of a .22RF.
Not looking for a deer rifle though a piece set up for .45 minies will certainly handle bunnies to bambis if it's loaded with round ball. The Spanish made .45 "Kentucky" I shot in the mid 70's would do anything asked of it, especially when I was in the woods, hungry and needed something to flavor the rice.
 
Yo Frankie.
Yeah, thought about getting a Gibbs once upon a time but back then decided on a New Englander reworked to .458 bore (.470 groove) instead.
For this project what I'm aiming for is a fairly light weight handy handling rifle, something that handles about like the example of a .22RF.
Not looking for a deer rifle though a piece set up for .45 minies will certainly handle bunnies to bambis if it's loaded with round ball. The Spanish made .45 "Kentucky" I shot in the mid 70's would do anything asked of it, especially when I was in the woods, hungry and needed something to flavor the rice.
I have two of the Gibbs rifles, the full size Pedersoli and the 7/8 sized navy arms as well as the New Englander in 40 and 45. For woods carry I much prefer the New Englander/High Plains Sporter…
 
Last edited:
@Bad Karma

Did you get those lined or were they small caliber that he bored out?
He lined them both. As I understand it he uses one liner size and once it’s in place, bores and reams it to the desired bore dimension before cutting the rifling. I did the Lee Shaver break in procedure with both of them and I couldn’t be happier with the results.
 
He lined them both. As I understand it he uses one liner size and once it’s in place, bores and reams it to the desired bore dimension before cutting the rifling. I did the Lee Shaver break in procedure with both of them and I couldn’t be happier with the results.
I just got my 45 1-18 lined from bobby Hoyt. I haven't shot it yet. I hope it isn't as accurate as my Pedersoli Gibbs, because I spent a lot on the Gibbs. lol I also ordered a Alexander Henry from Rod England in a 45 1-18 twist.
 
I just got my 45 1-18 lined from bobby Hoyt. I haven't shot it yet. I hope it isn't as accurate as my Pedersoli Gibbs, because I spent a lot on the Gibbs. lol I also ordered a Alexander Henry from Rod England in a 45 1-18 twist.
So far the Hoyt relines don’t challenge the Gibbs in my case. They are an excellent hunting platform. Different horses for different courses so to speak…
 
I'm fortunate to own some pretty decent roundball guns, custom. This being said I happened into an early .45 T/C Hawken that has turned out to be pretty darn good roundball shooter. I've a Lyman molds for a Maxi type projectile and a hollow base Minie type bullet but I can't recall experimenting with either. Both of these would use quite a bit of lead compared to a roundball. With its removable barrel clean up is a breeze.
 
So far the Hoyt relines don’t challenge the Gibbs in my case. They are an excellent hunting platform. Different horses for different courses so to speak…
Yes, an excellent hunting platform. That throws a light on what I consider a deficiency in our colorado regs. I think the regs should allow any caliber 40 and up for all big game with the only restriction being a realistic minimum projectile weight.
 
Yes, an excellent hunting platform. That throws a light on what I consider a deficiency in our colorado regs. I think the regs should allow any caliber 40 and up for all big game with the only restriction being a realistic minimum projectile weight.
Absolutely… specify 300 grain minimum or something. The 40, shooting a 300 grain flat point will anchor anything we can hunt in Colorado. it’s almost as if the only traditional muzzleloaders they considered were shooting round ball…
 
Got a .40 (16" twist) when we lived on the Gulf Coast.
A thousand miles north they say it's not big enough.
Unless the same powder and bullet are inside a piece of brass instead of steel.
Duh.

So if I get a little percussion rifle refit to between .44 and .45 bore diameter it would be approved for use with round ball but a .43 bore with an inch and half long bullet and a hundred grains of powder would not.
(giggle)
 
Last edited:
Back
Top