• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Made the Kibler Leap

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
So I’ve been pondering how to I’m going to finish the stock to really bring out the curl.

This morning, I’m getting ready for a final sanding, and I dampened the stock to raise the grain…

772218D8-D246-4AB0-B660-9B27E85C1A1B.jpeg


I don’t think I need to worry about whether or not the curl is going to show…
 
@BigAl52 came over today. He wanted to see the Kibler kit, and take at close look at quality. Together, we pinned the barrel…and did the ramrod ferrels.

AE339B6F-E69F-4C78-A921-707B47BF6F1A.jpeg

I took a small chisel and removed just a tiny bit of wood from one end of each of the ferrels, so that they sat flush.

BBF0ABC8-3BBC-4F49-9EB5-E1CADF2DD3F1.jpeg

The trigger guard, again, had almost no fitting required. This kit is just awesome quality.

B0638B84-DEF0-4B8D-A3C6-2FFA72D14ECF.jpeg

The tang simply lightly tapped into place…perfect fit
 
Yesterday after @BigAl52 left and went home; I finished pinning the gun and assembled in the white. Today, I completely disassembled the gun & I’ve put a grey antique finish on the barrel and all the hardware.

Then I put the first coat of stain on the stock…that doesn’t even look real.

93EAF2F4-E792-4338-B9A5-04C4B64C5DB5.jpeg
 
Last edited:
Yesterday after @BigAl52 left and went home; I finished pinning the gun and assembled in the white. Today, I completely disassembled the gun & I’ve put a grey antique finish on the barrel and all the hardware.

Then I put the first coat of stain on the stock…that doesn’t even look real.

View attachment 155256
That is amazing figure! Which stain is that?
 
Looking good. Take your time reassembling especially when installing the pins. Oil/Finish can fill the holes and dry and cause the pin to bind and go off course. Whatever you do, don't force a pin if it feels tight as you're tapping it in. Learn from my mistakes. Use a finger drill to clear the pin holes, and a small piece of wire to check things have lined up. You can also shine a light from the other side to see if everything is lined up. Looking forward to seeing both guns on this thread finished.
 
Looking good. Take your time reassembling especially when installing the pins. Oil/Finish can fill the holes and dry and cause the pin to bind and go off course. Whatever you do, don't force a pin if it feels tight as you're tapping it in. Learn from my mistakes. Use a finger drill to clear the pin holes, and a small piece of wire to check things have lined up. You can also shine a light from the other side to see if everything is lined up. Looking forward to seeing both guns on this thread finished.
Thanks for that advise. I’m just coming down the home stretch on my smr. I will heed your advice.
 
Yesterday after @BigAl52 left and went home; I finished pinning the gun and assembled in the white. Today, I completely disassembled the gun & I’ve put a grey antique finish on the barrel and all the hardware.

Then I put the first coat of stain on the stock…that doesn’t even look real.

View attachment 155256
I strongly disagree, it looks real,REAL GOOD!
 
Looking good. Take your time reassembling especially when installing the pins. Oil/Finish can fill the holes and dry and cause the pin to bind and go off course. Whatever you do, don't force a pin if it feels tight as you're tapping it in. Learn from my mistakes. Use a finger drill to clear the pin holes, and a small piece of wire to check things have lined up. You can also shine a light from the other side to see if everything is lined up. Looking forward to seeing both guns on this thread finished.
Great hint with the finger drill. I recommend the drill Kibler sent . Use it as a finger drill turning it backwards slowly and carefully. Do not go all the way through! Just halfway, then do the same on the other side. Backward rotation will not lift the grain at the entry point if done slowly and carefully. Beautiful stock! Can’t wait to see it finished.
 
62EF3F7C-8D5E-42B6-B630-76E9BA0968EF.jpeg

I was looking over the finish on my barrel…this barrel has a 1:48 rate of twist. I should be able to shoot conicals with this gun, farely accurately…I’m stoked.

I got 5 coats of MinWax Antique Finish rubbed into the stock yesterday…final coat went on at 5:30 last night.

This morning, around 9:30 I started with my final finish of TrueOil rubbed into the stock. Rubbed in 4 coats, it’s warm outside, so things are clipping along. The 4th coat was completely dry at 12:15…so I went over the gun with very fine steel wool. My stock is drying from its final coat.

If the final coat finishes glass smooth, I’ll pin it together tomorrow morning….following @Hatchet-Jack ‘s advice.
 
The figure in that stock is astounding. Just beautiful. I ordered my Woods Runner in plain maple becuase I just couldn't eake out the extra $$$ for the nicer stuff. Now you got me thinking........ That's a dangerous thing!

Please tell more about the method used on the metal.
 
The figure in that stock is astounding. Just beautiful. I ordered my Woods Runner in plain maple becuase I just couldn't eake out the extra $$$ for the nicer stuff. Now you got me thinking........ That's a dangerous thing!

Please tell more about the method used on the metal.
"And many,years from now. As yea lay tgere dyin in yer bed. Will you ask yourself. Should i have ordered the extra fancy?"🥲
 
The figure in that stock is astounding. Just beautiful. I ordered my Woods Runner in plain maple becuase I just couldn't eake out the extra $$$ for the nicer stuff. Now you got me thinking........ That's a dangerous thing!

Please tell more about the method used on the metal.
The stock on this gun is unlike anything I have ever owned. I’ve never held a gun with this much curl in the stock.

B409D15F-A208-4F62-87DC-CF774E1F158C.jpeg

For finishing the barrel, I called Kibler directly. I told them I wanted an antique grey finish on the barrel of my gun. They recommended Jax Black.

I took a length of soft wire and hung the barrel from the ceiling of the garage, and put cardboard down. I then took a soft rag soaked in alcohol and wiped down the barrel thoroughly, twice. I even cleaned the wire that I used to hang the barrel.

You will want to use rubber gloves when applying the bluing solution. I put a small amount of Jax Black into a small glass bowl and dobbed it onto the barrel making sure that I had an even finish on all sides. The metal instantly turns a dark grey/black. Then I took a green scotchbrite pad and very evenly started burnishing off the finish, still wet with bluing solution, until I had the amount of grey color that I wanted; as I did this I took a paper towel and wiped the barrel clean as I finished sections. Otherwise, the barrel kept bluing and getting dark again.

E76AFB9B-CED9-4317-AE7C-7686151648DA.jpeg

Final step was to wipe down the barrel 3 times with BreakFree CLP, to end the reaction; and then do it again the next day.
 
Last edited:

Latest posts

Back
Top