• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

WANTED WTB 54

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mtman725

The Last Best place, MT
Joined
Dec 11, 2021
Messages
763
Reaction score
819
Location
Montana
So just sold one of the others looking for a good 54, Hawkins 1.-60 a RB twist. Anyone want to part with one. let me know what you have. Looking.
 
I have a CVA Big Bore Mountain Rifle in .54, if interested.
Already got one off of you, its the one I am going to roll. Clean out plug was froze into place, ram rod was crocked as a dogs hide leg, set tigger will not work no matter what I do to it. And I have 3 CVA mountain Rifle, so I am petty sure I know how they work
 
Last edited:
Already got one off of you, its the one I am going to roll. Clean out plug was froze into place, ram rod was crocked as a dogs hide leg, set tigger will not work no matter what I do to it. And I have 3 CVA mountain Rifle, so I am petty sure I know how they work
Hmmmm? IIRC, that one had to set rear trigger to cock? But I could be mistaken.
 
So just sold one of the others looking for a good 54, Hawkins 1.-60 a RB twist. Anyone want to part with one. let me know what you have. Looking.
Would you be interested in a Pedersoli Rocky Mtn Hawken, .54 cal 1-66 twist, has a gorgeous maple stock? If so let me know, Gun is as new in original box,
 
Last edited by a moderator:
Would you be interested in a Pedersoli Rocky Mtn Hawken, .54 cal 1-66 twist, has a gorgeous maple stock? If so let me know,Gun is as new in original box,
Yes please, you have never shot it?
 
Last edited by a moderator:
Yes please, you have never shot it?
I shot it 20 rds, I am 80 years old and cannot see the sites very well, kinda sucks but it's better than the alternative. I can send you pics via email, not to tech savvy, send me your email address, thanks
 
I have a full stock .54 "hawkin style" Spanish barrel, I think the lock is a L&R, not sure. it's a shooter, I have no idea what the twist if but aren't all flintlock barrels RB twist?
 
Last edited by a moderator:
I have a .54 steel framed Mowrey that I can let go of. Beautiful curly maple wood. Browned barrel and receiver. Made in Texas.
 
Last edited by a moderator:
I have a .54 steel framed Mowrey that I can let go of. Beautiful curly maple wood. Browned barrel and receiver. Made in Texas.
That ones unknown to me, can you take a photo?
 
Last edited by a moderator:
Thanks for get back to at this time no flints, having a hard enough time to get ff LET ALONE FFF OR FFFF.
Thank you through.
 
I hope this works. The trigger can be over cocked if not careful. I've just gotten used to it. Pop the side plate off to reset.
1" X 32" bbl. A couple of small dents in the wood.
 

Attachments

  • 20220625_130634.jpg
    20220625_130634.jpg
    378.5 KB · Views: 0
  • 20220625_130629.jpg
    20220625_130629.jpg
    363 KB · Views: 0
  • 20220625_130548.jpg
    20220625_130548.jpg
    376.5 KB · Views: 0
  • 20220625_130541.jpg
    20220625_130541.jpg
    337 KB · Views: 0
Back
Top