• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Testing the flintlock?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I have seen an underhammer flintlock where the lock was on bottom. Yes - it fired just fine.
Wet powder will not burn - period.
Yep, my Early Lancaster fires fine upside down.....but I can't hit too well that way.....:)
 

Attachments

  • IMG_5895.JPG
    IMG_5895.JPG
    198.8 KB · Views: 89
The link below has a bunch of slow motion videos of flintlocks firing using a camera set at 5000 frames per second. Near the bottom are a couple of large Siler locks firing upside down. It's likely that the lock is faster in this position. I did a batch of these in 2007 and 2009 - these were done in 2009.
https://www.blackpowdermag.com/new-high-speed-video-from-friendship-09/
Regards,
Pletch
 
hope this is not off subject, but can a flint lock fire upside down? and under water? rely curious about it.
Flintlocks will (should) fire upside down. That's how you can tell if you have a good, fast lock. My Charleville and Brown Bess muskets as well as my rifle all will. Underwater? I doubt it. Once powder gets wet or even damp, it's toast.
 
My rifle never fails to fire when I hold it upside down and pull the trigger. It will fire occasionally when tested with an empty pan.
 
SUPER KOOL!
Thank you for posting this. Fascinating how little it can take to set off a charge - and how some, especially the Silers, can generate such such a massive cloud of sparks.
My rifle never fails to fire when I hold it upside down and pull the trigger. It will fire occasionally when tested with an empty pan.
I keep hearing that and have tried it a few times. Never could get it go though....
I figured on the Bess it might because it has a large flash hole and sometimes I get a bit of powder in the pan when loading the bore.
 
Flintlocks usually fire easily when they are held upside down. This has been proven thousands of times.
Many years ago an article in Muzzleloader magazine detailed tests done on flint locks by Peter Alexander. He tested locks off the gun. Each lock was primed, closed, finger put over the opening to the barrel, submerged in water for 1 full minute to test for proper fit of frizzen to pan, then fired upside down. Almost all fired every time.

Spence
 
Many years ago an article in Muzzleloader magazine detailed tests done on flint locks by Peter Alexander. He tested locks off the gun. Each lock was primed, closed, finger put over the opening to the barrel, submerged in water for 1 full minute to test for proper fit of frizzen to pan, then fired upside down. Almost all fired every time.

Spence
Maybe a good test for checking frizzen to pan fit, but with that pesky opening to the barrel and the touchhole, unlikely the pan powder, let alone the main charge would have been ignited if the lock were mounted on a gun. Particularly if held under water while attempting to fire.....
 
In rain? Absolutely, I've done it many times. Just gotta keep the lock dry which isn't all that difficult.
 

Latest posts

Back
Top