• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Ten year old loaded Hawken?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 21, 2012
Messages
1,130
Reaction score
1,990
Location
Southern Vermont
Just picked up a older T/C Hawken in 50.
Load still in barrel, owner has no idea what it is, but he did in include a partial box of t/c lubed Maxi-balls. What would be the best way to remove and clean?
 
Load still in barrel, owner has no idea what it is

What I would do!?!? Cap it and fire it, then clean it up.

*and here we go*
And hope it’s not loaded with smokeless powder....

Use ball puller, CO2 discharger or push out with pressurized grease. Not that difficult to do.
 
And hope it’s not loaded with smokeless powder....
Use ball puller, CO2 discharger or push out with pressurized grease. Not that difficult to do.

Pull the nipple and see if you can dribble some powder OUT. That will tell you if it is smokeless or not.

To be honest and safe, yes. When I do have a gun given to me loaded I pull the nipple and check the powder. If it's black, I set the nipple and fire it.
*note* No, I do NOT hold it in my hands. Sandbags and string do that job.
 
I'd just Redneck Remote it.....

Co2 dischargers have failed me, pulling bullets and balls is such a PITA , I'd pull the nipple, put fresh powder into the bolster to "help" the old , probably spoiled charge
....then just strap it safely and securely to an object at your range/backyard etc , tie a long string to the trigger, cap it, take a prone position behind cover and pull it.
 
Thanks for the advise, but I got real lucky. I soaked the bore with water after pulling the nipple. I was able to grab the lead conical,(unknown lineage), and with a little tugging, it came right out. Powder came out as black goo, probably pyrodex. Bore was slightly rusty, but with judicious swabbing with a wire brush and Ballistol, it looks not too terrible! Maybe I got lucky.
 
Folks did load smokeless. Some smokeless looks a lot like pyrodex. ten year old powder will shoot. And two hundred year old would shoot. Powder doesn’t go bad. But... if it was badly loaded bad bad things. I too would have looked for a way to pull the charge.
 
Thanks for the advise, but I got real lucky. I soaked the bore with water after pulling the nipple. I was able to grab the lead conical,(unknown lineage), and with a little tugging, it came right out. Powder came out as black goo, probably pyrodex. Bore was slightly rusty, but with judicious swabbing with a wire brush and Ballistol, it looks not too terrible! Maybe I got lucky.
I like this thread. Lots of fun ways to unload an unknown gun. All so far are very utube worthy if video'd.
 

Latest posts

Back
Top