• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

straight razor shaving

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Although I do not use a straight razor, for years I have collected early safety razors and related materials. Here is a page from "The Barbers' Manual" by A.B. Moler which was copyrighted in 1911 and I have the 1926 revised edition. Several pages and illustrations are dedicated to straight razor honing and shaving.
Straightrazorshaving.jpg
 
^^^^^^^^^^^^ those 10.00 Gold Dollar razors wont take an edge needed to shave with. I bought one for laughs....and now it sits in the drawer. Keep at it....get your self a German or Sheffield razor from the 1890-1930 ....those take an edge...and the older ones too.

Ok Ness, I took your warning and I gotta a couple of razors and worked em up. I'm shocked! I bought three in a set from Fleabay, used, bid em at $17.
I love the ol' W.L. Buck Co razor that's kinda yellow, slim, fits my contours right nicely. I soaked the blades with alcohol and shave with both of em. The Gold Dollar went to the shelf with the rest of the rabble. If ya need some close-ups or names of the blades, let me know.
20190325_150010.jpg
20190325_150036.jpg
20190325_150047.jpg
 
Nice..the black one seems to be the better blade. That yellow one has a lot of spine wear....but will still hone up and shave great. Are the pins tight to the blade ? If not ..you can lightly tap the pin with the back of a good size kitchen spoon ...to tighten them up. So yah noticed a difference eh ? Them gold dollars turn into letter openers.
 
Between the both of them I still like the feel of the "Buck" but both of em are great. I had to work the Hornet quite a bit to feel ready for it. The Buck was abused a lot. I'm gonna have to make some scales for her and polish her up before I use it again. You noticed the right side had been glued in the mid of the scale right? The left side had a wire at the end for a makeshift fix. Gonna re-do all of it, oil it up and leave it be till I can get to it.
20190326_124558 (2).jpg
20190326_130537.jpg

As for the Hornet, I'll keep it my main stay. She's tight with no slack. The grit, I have no idea. It's green, lol but it does the job. The finishing stone is a Swaty, 10 to 12,000 I'd only guess but I took a weeks worth of whiskers off in one swipe with no cussin.
The third one of the bunch on Fleabay is a Badger Razor Works and even tho she's a bit rusty (all of them were) I don't think a stone was used on it. I can't make out the writing except for "Germany" we'll see when she's slicked up a bit.
 
That’s what they call a Barber Notch....just decoration. Did not see all the hack work on the scales.And that black razor has some rust pitting on the edge...Your gonnah have to get an eye loupe to inspect that edge after honing....and hone past all that crud...for a clean edge...or you’ll be bleeding like a pig.
 
That Sir is a sweet set-up! I've had my feelers out here and there for some good stones, just looking for the right ones.
Your gonnah have to get an eye loupe to inspect that edge after honing....and hone past all that crud...for a clean edge...or you’ll be bleeding like a pig.
Yeah, I knew it was gonna be rough and take a while. I've got about the same type loupe and seen the surface, yuk. I've got the time to fiddle around with em altho the honey-dos keep me running sometimes. When I get em done I'll post the B&A pics.
 
they also made a real skinny straight razor called a slim Jim, I believe, that was just for trimming under the nose and for trimming the moustache.
 
By the way!?!? What's with the notch on the end of the blade for? It's made that way for a reason right?
The barber’s notch is designed to make opening the razor easier. This little addition was particularly convenient for barbers who would be flicking open several razors throughtout the day.
 
My Grandfather was a Barber, he was trained while aboard the USS MISSISSIPPI between the wars. His other job was gunner's mate. He later had several barber shops thru the years.

He used a Double Duck-Pearl Duck in his later years. My father would hone his razors and he taught me.

I was told the were 2 shaves and 2 prices for a shave in the 20's; a straight down shave was the most common, the working man preferred it because it didn't burn as much when he sweated.
The barber made one pass with the razor, going with the grain.

The more expensive, time consuming shave went down, then re-lathered, and shaved up. Usually businessman, Preachers, Dr's, etc got this shave.

I used a Double Duck for years, with a hot towel, Williams soap, strop, the whole mess.

I gave up cause an electric was faster, but I miss the Double Duck.
 
My Grandfather was a Barber, he was trained while aboard the USS MISSISSIPPI between the wars. His other job was gunner's mate. He later had several barber shops thru the years.

He used a Double Duck-Pearl Duck in his later years. My father would hone his razors and he taught me.

I was told the were 2 shaves and 2 prices for a shave in the 20's; a straight down shave was the most common, the working man preferred it because it didn't burn as much when he sweated.
The barber made one pass with the razor, going with the grain.

The more expensive, time consuming shave went down, then re-lathered, and shaved up. Usually businessman, Preachers, Dr's, etc got this shave.

I used a Double Duck for years, with a hot towel, Williams soap, strop, the whole mess.

I gave up cause an electric was faster, but I miss the Double Duck.

Yer GrandFather had great taste in razors.. now in some of the videos they make 3 passes.. I like the down pass.. Every one seemed to be after the Wade&Butcher Wedge Straights for a while.. UGH !! way too much steel to hone... must be a fad thing for some.. I believe the prices have dropped down quite a bit from a few years ago.. I like fartin' around with that stuff... If I could find a pre 1951 Filarmonica or a Wacker straight for cheap - I would be a happy camper indeed... !! thom
 
Back
Top