• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

William Moore 12 bore...

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Eterry

70 Cal.
Staff member
Moderator
MLF Supporter
Joined
Aug 15, 2010
Messages
4,455
Reaction score
4,062
Location
Between Red River Station and Doans Crossing, Tx.
The shotgun arrived today. It is "Farm Fresh"... the wood is in good condition, the barrels had plenty surface rust and a small amount of pitting behind the sight. The bore was rusty, but doesn't seem pitted. The barrels are .730., marked "Fine Laminated Steel"
The left lock won't hold, I haven't looked at it yet. It has musket nipples in it.
Screenshot_20181108-200251_Gallery.jpg
Screenshot_20181108-200251_Gallery.jpg
Screenshot_20181108-200256_Gallery.jpg
Screenshot_20181108-200251_Gallery.jpg
Screenshot_20181108-200256_Gallery.jpg
Screenshot_20181108-200251_Gallery.jpg
Screenshot_20181108-200256_Gallery.jpg
Screenshot_20181108-200302_Gallery.jpg
Screenshot_20181108-200314_Gallery.jpg
Screenshot_20181108-200319_Gallery.jpg

The locks are not as rusty as the barrels, and are marked William Moore- London.
The barrels are Belgium, according to V.M. Starr.
Is it a parts gun or Belgium made?
 
The barrels are marked with ELG inside a circle. This is a Belgium proof mark, correct?
The pictures didn't turn out as planned, i had to cut them down to get them loaded. I'll try to post better ones soon.

At .730 is it an 11 gauge? The one Starr called "Sue Betsy " was an 11 gauge as well.

What's your opinion of the scattergun?
 
Last edited:
For what I see it is Belgium stamped with a English makers name for export ,this was a common practise . It could have been built has a 11 bore but most likely it started has a 12 and barrel ware it is now a 11.Belgium did make some nice percussion shotguns but I am afraid this is one of the cheap exports .
Feltwad
 
I'll bet if you get the old gun up in shooting shape it will give you years of shooting pleasure, regardless of it's family history.

Spence
 
Thanks for the reply Feltwad. I am hoping to repair or replace the lock and get some range time out of it. The locks are marked London but was suspicious of it being English. The proof marks settled all doubt.
Restoring this old gun is a good project if this is your first restoration take your time and always remember never take it to far not forgetting that this gun is in the excess of 150 years old and should look its age not some thing straight of the shelf so if in doubt leave it be.
The lock most likely will be a broken sear spring or a bent nose on the sear it could also be that the sear leg is binding and not allowing it to engage the tumbler ,also have the barrels checked by a good gunsmith for wall thickness , lap out the bore check the ribs on most Belgium guns these are ok because most are brazed or silver soldered . Good luck with restoration and always remember not to take it to far
Feltwad


 
Last edited:
Eterry,
While Belgian made, it's not a "bottom of the barrel" type at all, and looks a nice gun and will look nicer still when cleaned up gently!

.730 " is still a 12 bore. (12 runs between .729" and .740")

Best,
Richard.
 
Thanks for the kind words Gentleman...i hope to use it soon.

First i checked for a load in the barrels... or a note stating it was used in the Coffeville Ks. Raid.. lol. I spent some time with 0000 steel wool on the barrel exterior, next i want to gently steel wool the bores to get some rust loose. Then I'll worry about the lock. I'll need a hammer; the left one has begun broken and brazed back.

I don't plan to do much to the stock... I'd like to fresh the checkering but not qualified. I may steam some dents from the stock, i love the dark patina.
 
Bit of linseed on the stock will bring it back to life.
Boiling water in the bores is V good for softening rust, then a good scouring out with steel wool on a jag or wrapped around a brush.

All best,
R.
 
I spent a few hours working on the W-M, and was pleasantly surprised when I learned the sear screw on the left lock was backed out a full turn, causing it not to set. Tightening it up left me a properly working lock.
Then i spent some time scrubbing the bores with hot soapy water until the patches were mostly clear. Then some scalding water to rinse and some oil for lube.
I used a toothbrush and soapy water to get the powder residue behind the locks and in the barrel channel of the stock.

The more i clean, the better it looks .
 
I spent a few hours working on the W-M, and was pleasantly surprised when I learned the sear screw on the left lock was backed out a full turn, causing it not to set. Tightening it up left me a properly working lock.
Then i spent some time scrubbing the bores with hot soapy water until the patches were mostly clear. Then some scalding water to rinse and some oil for lube.
I used a toothbrush and soapy water to get the powder residue behind the locks and in the barrel channel of the stock.

The more i clean, the better it looks .
I use this tool for lapping out rust in muzzle loading shotgun bores , it has a detachable head and is used with a electric drill .Over the years I have used this homemade tool on many barrels with good results
Feltwad

 
Well, the left lock still won't hold. I've heard of cutting a new notch... i may have to look into that.

I think I'll leave the stock alone, other than a coat of linseed.. like i said i like the dark look.

I had a dowel with steel wool on it for work on modern shotguns, I'll locate it and give the bore a polishing.

I watched the Midway video on YouTube about refinishing the barrels... they look nice and the laminate really stands out. But i don't have the tanks to do that. Guess I'll use more steel wool and elbow grease.

I'll need a set of nipples... see my other post on that.

I'll post pics again soon.
 
Take a tip from me do not recut a new notch it will alter the throw of the hammer with one hammer when both at full cock one will he ahead of the other .Check to see it the sear leg is binding on the wood work if that is ok then go to the full cock notch on the tumbler just dress it up by using a needle file with a couple of passers .
Feltwad
 
I have one of these in 10 bore. It takes top hat musket caps and is very silly. I like silly guns :D
 
ETerry,

To brown barrels and bring out the figure, you don't need tanks. These are usually done with a solution and left to rust, carded, and solution applied again, until desired colour is reached. This I s a V brief description! :)
 
ETerry,

To brown barrels and bring out the figure, you don't need tanks. These are usually done with a solution and left to rust, carded, and solution applied again, until desired colour is reached. This I s a V brief description! :)

Where can I find a detailed description?
May post over on the gunsmith thread for info...
thanks
 
ETerry,
Probably the best bet would be over on the Double gun site...or just look up "barrel browning" or Damascus barrel browning.
I have a solution , but some of the old ingredients are getting hard to find. (like tincture of steel and even Mercuric chloride these days)
Mixtures vary, and can give from a soft brown, to a near black and white finish.
I will try and find some info for you as time permits.

Just did a couple of barrels last winter.

Best,
Richard.
 
I am building a lefthand flintlock early Lancaster style. I just finished drawfiling the barrel and using several coats of Homer Dangler brown solution. just not looking forward to removing the old finish/patina/rust on a double barrel, lots of tiny nooks and crannys.
 
Last edited:
Back
Top