• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

REGARDING 1862 5-SHOT POLICE MODELS?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Mark it with some Dykem, re install it and see if it gets rubbed off. Never seen a bolt stretched before as the fingers are usually to hard and thin.

A bolt big enough to have rub marks from the cam way down there wouldn't be able to be installed to even check !! 😄
 
A bolt big enough to have rub marks from the cam way down there wouldn't be able to be installed to even check !! 😄
I think Mike is correct. Picture #1 in bolt marked with Sharpie. #2 is the contact
1862#2 bolt1.jpg
1862#2 bolt2.jpg
1862#2 bolt3.jpg
marks installed. #3 is sharpie polished off showing original mod mark.
 
I think Mike is correct. Picture #1 in bolt marked with Sharpie. #2 is the contact View attachment 315650View attachment 315651View attachment 315652marks installed. #3 is sharpie polished off showing original mod mark.
Well, that tells the story of the cam contact. I had it wrong! Thanks for taking the time to reassemble and clear that up. I think Mike must have it right as an attempt to stretch the finger although I've never seen it done before on spring steel. I don't think it a particularly good idea for bolt longevity though.
 
Well, that tells the story of the cam contact. I had it wrong! Thanks for taking the time to reassemble and clear that up. I think Mike must have it right as an attempt to stretch the finger although I've never seen it done before on spring steel. I don't think it a particularly good idea for bolt longevity though.
No problem, Only took a couple of minutes to check it. Besides I have received more help form the MLF crew than I could return. All the best, CLB
 
Back
Top