• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Jukar/CVA Kentucky Rifle stock reduced to $50 shipped Conus

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

ajbennettnc

20-to-the-pound
MLF Supporter
Joined
Jan 3, 2021
Messages
1,123
Reaction score
538
Location
Uwharrie Mountains, N. Carolina
For sale: used two piece stock for .45 CVA or Jukar Kentucky rifle. I bought it with a flintlock barrel and lock on it, and no longer need this stock since I moved those parts into another stock. Some of the hardware I have left on the stock and will include; buttplate, toe plate, and ramrod pipes. Unfortunately, those pipes had been glued rather than screwed in by a previous owner, but you can get the screws and all other missing parts from a vendor that is commonly mentioned on this forum.
Stock is scuffed and has electrical tape residue (the barrel was taped on when I got it.) There's a small crack in the left side of the breech inlet, near the upper sidenail hole. The stock has been cut down a little much or had a huck knocked out in order for the hammer to fall, but when I did have a lock on it it still wasn't fully inlet. Somebody was in a rush to get in the woods when they originally built this one!
Anyhow, was asking $65 but now $40 plus shipping for this stock. For another $10 i wil polish up the brass.
Will ship it disassembled into the two pieces to save costs.
Will consider trade for a smoothbore flintlock pistol barrel, particularly one of the ca. 1970s Ultra Hi/ Miroku "Tower" or "Continental" style ones. PM if interested. Venmo or PayPal friends and family or check or money order accepted. Paypal preferred.
 

Attachments

  • 20231014_234244.jpg
    20231014_234244.jpg
    1.2 MB · Views: 8
  • 20231014_234310.jpg
    20231014_234310.jpg
    334.7 KB · Views: 0
  • 20231014_234319.jpg
    20231014_234319.jpg
    260.5 KB · Views: 0
  • 20231014_234249.jpg
    20231014_234249.jpg
    2.1 MB · Views: 0
  • 20231014_234330.jpg
    20231014_234330.jpg
    938.6 KB · Views: 0
  • 20231014_234349.jpg
    20231014_234349.jpg
    1.2 MB · Views: 0
  • 20231014_235044.jpg
    20231014_235044.jpg
    1.8 MB · Views: 0
  • 20231014_235056.jpg
    20231014_235056.jpg
    341.3 KB · Views: 0
  • 20231014_235103.jpg
    20231014_235103.jpg
    1.3 MB · Views: 0
  • 20231014_234223.jpg
    20231014_234223.jpg
    230.8 KB · Views: 0
Last edited:
For sale: used two piece stock for .45 CVA or Jukar Kentucky rifle. I bought it with a flintlock barrel and lock on it, and no longer need this stock since I moved those parts into another stock. Some of the hardware I have left on the stock and will include; buttplate, toe plate, and ramrod pipes. Unfortunately, those pipes had been glued rather than screwed in by a previous owner, but you can get the screws and all other missing parts from a vendor that is commonly mentioned on this forum.
Stock is scuffed and has electrical tape residue (the barrel was taped on when I got it.) There's a small crack in the left side of the breech inlet, near the upper sidenail hole. The stock has been cut down a little much or had a huck knocked out in order for the hammer to fall, but when I did have a lock on it it still wasn't fully inlet. Somebody was in a rush to get in the woods when they originally built this one!
Anyhow, was asking $65 but now $40 plus shipping for this stock. For another $10 i wil polish up the brass.
Will ship it disassembled into the two pieces to save costs.
Will consider trade for a smoothbore flintlock pistol barrel, particularly one of the ca. 1970s Ultra Hi/ Miroku "Tower" or "Continental" style ones. PM if interested. Venmo or PayPal friends and family or check or money order accepted. Paypal preferred.
Hi,
Still have this?
 
Status
Not open for further replies.
Back
Top