• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

FOR SALE traded

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

adkmountainken

40 Cal.
Joined
Sep 11, 2004
Messages
621
Reaction score
277
Location
the great Adirondacks
i have a Green Mountain .40 caliber drop in barrel for a TC Hawken or Renagade 1 inch frame. barrel is MINT i do not have a bore light but can look with flashlight and see it is very crisp and clean. length is 33 inches and fits both Hawken and Renegade frame. asking $350 shipped will include new syn ram rod. always up for a good trade.
 

Attachments

  • IMG_4159.jpg
    IMG_4159.jpg
    33.1 KB · Views: 2
  • IMG_4158.jpg
    IMG_4158.jpg
    60.6 KB · Views: 0
  • IMG_4160.jpg
    IMG_4160.jpg
    32.8 KB · Views: 0
  • IMG_4162.jpg
    IMG_4162.jpg
    27.7 KB · Views: 0
i have a Green Mountain .40 caliber drop in barrel for a TC Hawken or Renagade 1 inch frame. barrel is MINT i do not have a bore light but can look with flashlight and see it is very crisp and clean. length is 33 inches and fits both Hawken and Renegade frame. asking $350 shipped will include new syn ram rod. always up for a good trade.
Twist rate ?
 
i am not sure if GM is a 1:66 or a 1:48 with the .40 cal i can tell you i had it out once and with 40 grains Swiss FFF .018 hand cast 3.11 rb and bear greased patch ikt prints clover leaf at 25 yards from a bench. its the only time i have shot it.
 
Back
Top