• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Recent content by cutshurt

the hawken shop
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    .454 use in .45 or .50 Flintlock.

    I think your going to make shooting your gun a whole lot less like fun and a lot more like work hammering the 454s down your barrel, and could be turning it into a bomb if you leave any air space between powder and ball, because of build up of lead and powder rez, just don't sound like a safe...
  2. C

    New hawk

    Frorged up from a 20 oz ball peen hammer, 18 inch hickory handle with a little celtic flav... Darrel
  3. C

    Got my newest rifle today

    I Like it !!! :bow: Darrel
  4. C

    cherry

    I have worked all the gun stock woods with no problem, but I can NOT work Padauk (not a stock wood)two days after working it on my lathe I was in the hospital with a getting much worse body rash and had problems breathing, good way to find out if you can work with a wood is rub a little dust...
  5. C

    Pipe Tomahawk?

    First one I forged from a ball peen hammer 2nd one is forged from a muzzle loader barrel.
  6. C

    Blade rivet

    I've made a few folders and I have used most of the pin stock mentioned, I have never had one returned or have any were out either. Never have hardened any. Darrel
  7. C

    Buttplate to Fit

    I am a black smith I might be able to help make one for you ! do you have a pic of the gun? Darrel
  8. C

    1851/1860 Slim Jim Rig

    That is great work sir !!! Darrel
  9. C

    New work on an old project.

    Ya know I as thinking I was going to scrool down and see some ... God awful club :barf: .... & I was right !!!! so please send it to me waste no time in doing so, I will burn it for you. WOW YOU ARE A GUNMAKER :bow: Darrel
  10. C

    parts source for CVA rifle kits(no ebay)

    I'll ecko .... deer creek & Pats I have delt with both and they are helpful, fast & honest good prices too ! Darrel
  11. C

    help!! sick to my stomach

    I'm no expert, but I would drill for a liner or I would thread the old hole run a bolt in with some lock tight, then drill a new hole.
  12. C

    doglock on a kentucky?

    Well I think it would look a little weird ... but its your gun, if its what you want to do, dont worry what anyone else thinks ... I say go for it. Darrel
  13. C

    Converting from perc. to flint?

    The caplock hawkin rifle you have, I think has a patent breech, and you cant use a flintlock with that breech, you will need a barrel made for that type of lock. The CVA guns have a drum and nipple, you can switch over at will with them, I just did that myself and have to say what a hoot :)...
  14. C

    Any Spike Knives Out There

    I dont like them for knives ... but I have made a few, I think they make better hawks. This one was done with the spike head being the cutting edge. Darrel
  15. C

    Good Sparker

    I make and sell steels, you can pm me if you still need some help.
See more
Back
Top