• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Brass tacks and other bling

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I love tacks on a gun. I don’t have them on any of my guns now as not in their time frame. A tacked gun if appropriate is no problem for me when I’ve bought a gun. I have bought several and probably paid more for a few bucks worth of tacks
 
Take a look at this Lyman GPR I sold not long ago. Had I had five (5) more like it I could have sold all five, such was the interest. I didn't do the tack work myself but in my humble opinion it was tastefully done.
The point is rifle adornments are a matter of personal taste, like most things. I find it interesting that tack work was also desirable in the 18th and 19th centuries with multiple examples of such. I have no doubt that were we able to teleport back in time and poll riflemen of the period, the same dichotomy would exist then as now- some like stock tack work, some don't. Literally a matter of personal taste.


OIcDi6Th.jpg


8xiOddyh.jpg
 
Tacks are OK as stated in other posts if not over done, they are not for me, and I like honest patina. Think about if a fellow then was to purchase a build from a gunsmith it would be new and age as it was used. As to fake wrist repairs well again it is up to the owner personally I would not buy such a weapon with tacks or a wrist repair.
 
Have to agree with you Flintandsteel, I'm a fan of patina on guns and frankly on other things too- some types of furniture, leather jackets. Not on new cars though. Or on ice cream.
I may be old but I haves my standards.
I’m clumsy enough that a trip or two in the woods or in the canoe and - voila!
original, authentic patina. Each bruise, rash, bump retrieves memories of a special day.
 
I have a CURLY & ERMA made gun in flint lock 12 bore, smooth. I am told that they only made 10 of them in 12 gauge. it has a sitting fox on the barrel & on the side plate. it is a keeper! I bought it from a reenactor who only ever shot blanks through it. at events & parades. sense I have owned it 12+ years, it has never seen a blank load, in it and it never will.
 
Since this thread has segued between brass tacks and Curly Gostomski trade guns, these pictures from the web may not be too far out of line:

Midland Agrarian NW Gun (2).jpg


Full length view. Note the brass tacks on the buttstock and ahead of the lock.

Midland Agrarian.2.jpg


Close-up of the lock, breech, and trigger.

These pictures came from the Midland Agrarian Blogspot. This blog appears to have been inactive since about 2014, but is still up for viewing. The focus is on farming, traditional lifeways (including shooting), and some politics. The blogger (I don't see his name right off the bat) said he bought this gun off an auction site. It was apparently in pretty bad shape, but he managed to take it apart, clean it up, and get it shooting again. He did not specify the barrel length, but by calculation, if we assume the LOP is between 13-1/2" and 14", the barrel would likely be around 33" - 34" long. He did say this gun is 12 gauge. There may have been others, but Mr. Gostomski was the only builder I know of who produced 12 gauge Northwest guns, and we know he used the Pedersoli LOTT locks. I wish we had more pictures and more detail, but we don't. He didn't show or comment on any marks inside the lock plate.

I've seen photos of at least one of Mr. Gostomski's early guns which had the oversized triggerguard but a stubby little standard-sized trigger. It just didn't look right. This gun has a proper trigger. It appears to have a simple wood screw ahead of the triggerguard bow, rather than the "upside down" tang bolt generally associated with original British Northwest guns. The Gostomski guns were discussed at some length in an earlier thread on this forum, if anybody is interested: Curly Gostomski .62 Fowler Value

Anyway, here is another tacked gun to add to the gallery.

Notchy Bob
 
I personally don't like the looks of tacks and wouldn't buy a gun with them.
I have no preference, but have restocked several customers rifles because the tack work is a personal thing, and because of the custom tack work the rifles were bought for less money.
 
IMG_1330[555].jpg
IMG_1330[555].jpg

This is a real wrist repair, nothing fake about it. The stock was broken at the wrist and was mended with some "pine tar" and a piece of brass. Sorry about the double picture. This is the first picture that I have posted in this forum. David Wright print is in the background.
 
Last edited:
Take a look at this Lyman GPR I sold not long ago. Had I had five (5) more like it I could have sold all five, such was the interest. I didn't do the tack work myself but in my humble opinion it was tastefully done.
The point is rifle adornments are a matter of personal taste, like most things. I find it interesting that tack work was also desirable in the 18th and 19th centuries with multiple examples of such. I have no doubt that were we able to teleport back in time and poll riflemen of the period, the same dichotomy would exist then as now- some like stock tack work, some don't. Literally a matter of personal taste.


OIcDi6Th.jpg


8xiOddyh.jpg
Very nicely done. Did Lyman use different locks for their flinters over the years? Or is that a replacement lock?
 
it was a good thing when CURLY, changed out the LOTT ITALIAN Locke for the THOMBSTONE, SITTING FOX, it ended the LOTT'S being sent back for repairs. odd, because as a rule ITALIAN items are good.
 
Back
Top