-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Help Support Muzzleloading Forum:
-
-
Don Steele replied to the thread Joann's - what am I doing wrong ?.JoAnn’s website says the Drill cloth cannot be shipped. Seems odd, but that’s what I saw when I tried to order it directly after... -
I'm glad that @olskool has posted Tip's target, as I was just going to! Not that I didn't know it already, but when I had visited him...
-
Get an air rifle.
-
Don Steele replied to the thread Maybe better patch lube option?.Pushing fouling onto the breech face or into the ignition chamber (patent breech) of a rifle is usually caused by using a jag/ wiping...
-
Don Steele replied to the thread Favorite caliber to shoot.Favorite caliber to shoot..?? 40, NO question.
-
Don Steele reacted to cynthialee's post in the thread Hawken Rifles, What's All The Hoopla?! with
Like.
Hawken and Hawkenesque rifles are good shooters, handle well and fit most average size shooters. The shorter barrel (compared to a... -
you can make your own come to Kempton gun makers fair I will have gun flint demos
-
Messing with the toe you can make a frizzen pop up at first contact or make full contact all the way. It's crucial that the toe work...
-
Don Steele replied to the thread Flints.Excellent points. Polishing the foot of the frizzen and the face of the frizzen spring without removing metal is as far as I go on mine...
-
The other key factor is how the toe of the frizzen engages the spring. Much can be done tweaking this and much can be screwed up VERY...
-
Don Steele replied to the thread Flints.As prices for flints have risen so dramatically in recent years, I explored options to simply knapping off bits as needed in an effort...
-
-
Jim Kibler has a good video of sharpening flint. 3 shots is unacceptable. i am on shot 73 with one flint in my SMR. geometry makes a...
-
As they get used and shorter, I'll either double leather them or a small stick behind the flint to push the flint forward and get that...
-
I drill my vents so that a pipe cleaner will work. I like a #51 which is .067 inch. #52 is .063". Numbered bits are available in most...
-
It will be best to remove and replace. Vents are cheap.
-
-
Loading…
-
Loading…
