• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Check your bolt screw

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 30, 2015
Messages
1,854
Reaction score
140
Location
Georgia
On Uberti Navy revolvers. One of mine worked out, which I've written about already. Today I checked the second one with was very loose...took about six turns to tighten it up. I should have Lock Tited it but didn't...oh, well. I think cocking the hammer turns the screw a bit. Something to keep an eye on.
 
I once bought an Uberti 1858 Remington in Navy caliber. Price was reasonable, but it was almost impossible to cock. I offered the seller half of what he was asking and he accepted the offer.

I disassembled the gun and the bolt holding the hand was backed out so far it was dragging on the frame. I tightened up the bolt to just a bit less than snug and lubricated the internal parts. It has a very smooth action and is a great shooter.

Checking on all the internal fit is a good reason to completely disassemble your revolvers for cleaning after firing.
 
I have Uberti Hombre that I have to constantly tighten the screws on. I just use my finger nail.

Ruger BH SA revolvers were known for that as well. Finger nail polish was the solution before loctite was invented.

I haven't noticed it with my cap & ball Pietta revolvers.
 
Back
Top