Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
I know that trade guns had a turtle type- solder on front sight. Today on a single plain barrel most beads have a thread but the taps seem too precise for earlier times. Were beads used and how were they installed on fowlers, etc.?
I don’t recall ever seeing a bead on a gun made befor cr 1900 except for hand guns. In those cases the bead seems to be tapped in.
I did have a smoothie that had a drilled hole and had a bead riveted in :td:
Even a good few 18th Century guns had beads, but I would imagine they were riveted in. Does not take much to hold a bead in. Ones I have seen with a missing bead had no threads at that time, as far as I could see.
At that time though, soldered on were more common.
I've considered the rivet- I think the barrel could be inserted over a solid round bar to hold the bottom of a rivet that was counter sunk into the metal. If that is how it was done.