• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Clay pipe leaks

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

snubnose57

40 Cal.
Joined
Jul 23, 2010
Messages
194
Reaction score
8
I have one of the real small clay pipes, I think they are called the 16th century Elizabethans.
After a few bowls, tar starts leaking out of the pipe at the base of the bowl.
I clean the stem often, had one I broke did the same thing.
I never have this problem with my bigger clays, just this one small pipe. I find it strange that after a few smokes I would have to put in the coals for a cleaning. Strange...
.
 
Remove the stem, cover stem end with a finger and blow through the bowl. There should be no air leak. If there is an air leak then the pipe is cracked somewhere. Discard pipe.

If it's air tight, it may be wet from the moisture from the tobacco or draining back from the stem. Let it dry and use two or three pipes in rotation so they can "rest" between smokes. With time you should build up a carbon lining in the bowl and that should solve the problem.

Or, as Tenngun suggested, the clay may be too thin . Even so, a good rest and a layer of carbon should allow for a smoke or two before it leaks. Also, be sure to allow the pipe to dry completely before you scrape it out. When wet, the clay is very soft and you will remove the clay with the used tobacco. That can cause a "thin" pipe. This leaking problem is one of the reasons briar replaced clay.
 
I cover the bowl, blow through the stem (one piece pipe) No leaks.
I smoke it in the morning and evening, must not be getting its rest.
 
There's a guy up here in Ferrisburg Vermont (Erik Andres? Good Companion Bakery - also a baker) who makes clay pipes in a compression mold rather than slip casting them. It's an old method that makes a much thicker-walled, uniform wall pipe. They also have a larger inside diameter in the stem.

They are kind of pricey, but miles better than your standard white clay pipe.
 
Just to add another variable, the type of tobacco and how fast you smoke can come into play also. One of my favorite parts of smoking clays (and especially corncobs) is their ability to provide a dry smoke without the wetness and tongue bite of unseasoned briar.
 

Latest posts

Back
Top