- Joined
- Aug 5, 2008
- Messages
- 905
- Reaction score
- 20
there is a discussion about filing the muzzle for decoration somewhere i have searched and cant find it anyone know where to look
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
muzzle
- Thread starter preston cook
- Start date
Help Support Muzzleloading Forum:
Stubert
40 Cal.
- Joined
- Nov 1, 2006
- Messages
- 430
- Reaction score
- 46
I did my rifle. Its easy, I used a triangle file and did the middle of each flat on the outside, then I used a center punch and made a dot between the file marks and the bore. Hardest part was getting the browning right so it matched.
Little Wattsy
69 Cal.
- Joined
- Jan 7, 2008
- Messages
- 3,631
- Reaction score
- 9
Stubert said:
hotoSmile:Lots of way of doing them. If you mean a groove & then some dots like this, it is done with this lil tool.
This one was done with a hand graver & a small 3 sided file on a Jaeger rifle I built one time.
Lots of dif ways of doing them, just draw something out & do it with cutters, files, gravers, etc..
:thumbsup:
Keith Lisle
This one was done with a hand graver & a small 3 sided file on a Jaeger rifle I built one time.
Lots of dif ways of doing them, just draw something out & do it with cutters, files, gravers, etc..
:thumbsup:
Keith Lisle
- Joined
- Aug 5, 2008
- Messages
- 905
- Reaction score
- 20
thank you that was what i was looking for it is great. :thumbsup:
mikemeteor
45 Cal.
- Joined
- Nov 16, 2008
- Messages
- 660
- Reaction score
- 3
That one must spray 'em around the target quite a bit, Birddog, but looks like she might be a quick thumb-loader. :grin:
catman said:
Catman: The tool is actually not my design. Ken Guy (Packdog) is the one that came up with the first similar lil gadget. I looked at his & made me one for large bores & one for small bores. Reason of 2 dif sizes is on the small bores I want to cut closer to the bore & by design I couldn't get the cutter in there where I wanted to on the larger one. So I just made a small one too & can cut one from .32 cal up to .58 cal.
:thumbsup:
Keith Lisle
Capt. Fred
50 Cal.
- Joined
- Nov 18, 2008
- Messages
- 1,192
- Reaction score
- 0
That's a pretty piece of wood on that full stock derringer!
