• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Basic carving chisel suggtions

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
There's a feller with the right number of chisels for the job...... (See that BillRaby?)
That's not even half of them, no joke!

Oh, and he really recommended this type of wax for wood and such.
IMG_7298[1].JPG
 
The most important part of carving is sharpening the tools you have and what you have may be adequate, but I have no knowledge of them. Pheil makes many 4 and six piece sets that will be all you need in carving the most exacting pattern for a longrifle. There are others but in the end, its you. Learning to sharpen them will ease your frustration and accelerate your learning curve.
https://www.woodcraft.com/categories/pfeil#Best of luck!!!!
Robby
Are there any Pfeil sets that are known to be a good starter set for working on ML kits? Would any of these (links below) be a good starter?

pfeil Swiss made - Palm Handled Carving Tool Set B, 6 piece

pfeil Swiss made - Palm Handled Carving Tool Set C, 6 piece

pfeil Swiss made - Palm Handled Carving Tool Set D, 6 piece

pfeil Swiss made - Intermediate Size Carving Tool Set (B), 6 piece

Thanks,
Dave
 
dal, The last one you listed looks like the one my wife bought me as a Christmas present fifty years ago. I have added a few since then but hardly ever use them as those in that basic set have served me well. Personal preference, I like the handles on them, the palm handled ones don't control as well for me.
Robby
 

Stick with the full size chisels. You use those with both hands and have a lot more control.
 
I have a 12 piece set of Greenlee chisels which must be 50 years old along with a mix of the Swiss brand gouges and V's. I have found that a flatter gouge gives better control when moving a lot of wood with hand pressure or mallet. A set of smaller palm gouges are needed for the fine finishing work. Glad I collected them when I did after looking at what they cost today. They are a little like potato chips, you always want another and another.
I checked E-Bay and found this set which is pretty much the same as what I'm using. Their finish isn't as fine as the Swiss brand but this is a good starter set'
https://www.ebay.com/itm/SET-15-GRE...211352?hash=item2aed05ded8:g:SqgAAOSw9EteX6wa
 
Last edited:
Back
Top